1592025050 iProChill v2.5 10D00 AG v1.3 GB 18.02.2016.docx iProCHILL 56/205
5.9.18 Control Panel
Your own LCD keyboard can be customised in this menu.
If user entered into SERVICE menu with 1
st
level or 2
nd
level, he needs to input the 3
rd
level password to
enter in the control panel screen. See graph below:
On the contrary, if user entered into SERVICE menu with 3
rd
level, no password is needed for control paned
menu anymore.
The possible options in this menu are:
Parameters file management: Load last saved parameters or load default parameters.
Contrast & backlight:
Contrast: regulation from 0 to 200
Back light time ON: regulation from 0 to 200 seconds, or always on
Log file management:
Export log files to USB disk.
Language selection: Italian English Italian
Update Visograph
System Information: Release software, setting IP address and MODBus node.
Parameters file management:
Position the cursor on the element with UP and DOWN key, press ENTER, the parameters value will be
loaded from configuration file.
There are 2 files available, one for latest saved parameters and another for default parameters.
The 3
rd
line “Save as default parameters” means copy latest saved parameters to default parameters
configuration file.
To Next Page
Loading...
