1592025050 iProChill v2.5 10D00 AG v1.3 GB 18.02.2016.docx iProCHILL 57/205
Log file management:
Plug the USB disk in iPro,send command from this screen, the log file will be export to the USB disk.
The log file path is: USB ROOT:\ipro\IP address of the ipro
One example for unit log: F:\ipro\10.161.92.79\log\Unit_20130221.txt
Unit log file (Record every 100 PLC cycles):
Alarms log file (including alarms_a, alarms_b, alarms_c):
alarms_a = unit alarm
alarms_b = circuit alarm
alarms_c = compressor alarm
alarms_a log file:
Xev log file (including xev11, xev12, xev21, xev22):
Record every 10 seconds if XEV20D is available.
To Next Page
Loading...
