1592025050 iProChill v2.5 10D00 AG v1.3 GB 18.02.2016.docx iProCHILL 84/205
And user can change a parameter’s protecting level to Pr1 or Pr2 in this screen.
Click on the family name label can open this parameter family.
To modify a parameter, click on the value:
Press the button.
Increase or decrease the value using the and buttons.
Confirm the modification by pressing the button again.
and buttons also can be used to move the cursor. When cursor points to different parameters, the
parameter’s description will display in the bottom.
Press the button can exit current screen.
Warning:
For parameter groups CF, IO, CA, and RA, they can be verified and changed only if the unit is switch-OFF
(stand-by).
To Next Page
Loading...
