Emerson Dixell iProChill IPC115D User Manual

1592025050 iProChill v2.5 10D00 AG v1.3 GB 18.02.2016.docx iProCHILL 9/205
3.1 MAIN FUNCTIONS
Management of the cooling/heating unit with:
 Single-circuit up to four compressors
 Four circuits up to 16 compressors
 Screw compressors
Start-up of configurable compressors:
 Direct
 Part winding
 Star delta ( not available)
Compressor management with inverter:
 1 compressor per circuit
Configurable soft start-ups:
 Start-up with unloading valve
 Idle running valve
Unloaders management:
 continuous working
 step working
 modulating working (screw compressors)
Compressors rotation and temperature control configurable from parameter:
 by fix sequence
 by FIFO sequence
 by balance
 by saturation
Step-less compressor management:
 with neutral-zone regulation
Compressors liquid injection function
 Control with dedicated PTC probe
Compressors discharge high temperature alarm function
 Control with dedicated PTC probe
Complete management of two water side pumping units:
 2 pumps evaporator side
 2 pumps condenser side
Customised default display of all variables
 Temperatures
 Pressures
Other displays available
 Status of the digital inputs
 Compressor running hours
 N° compressor start-ups
 Evaporator/condenser water pump running hours
 Time remaining before defrost
 Percentage of the proportional outputs
 Compressors discharge temperature
Reset alarms using customised password
 Historical alarms
 Compressor thermal overload alarms
Possibility of enabling/disabling the individual circuit
 Allows maintenance of the circuit
 Allows "partialised" working of the unit
Possibility of enabling/disabling the individual compressor
 Maintenance of the individual compressor
 Malfunction

Emerson Dixell iProChill IPC115D Specifications

General

Brand	Emerson
Model	Dixell iProChill IPC115D
Category	Controller
Language	English