E
Eric LeeSep 10, 2025
Why does my Emerson EWD2004 DVD VCR Combo output no DTS audio?
- AAmy BrownSep 10, 2025
The Emerson DVD VCR Combo does not support DTS audio. This is not a malfunction.
Why does my Emerson EWD2004 DVD VCR Combo output no DTS audio?
The Emerson DVD VCR Combo does not support DTS audio. This is not a malfunction.
Why does my Emerson EWD2004 have no power?
If your Emerson DVD VCR Combo has no power, ensure the power plug is securely connected to an AC outlet and that the power is turned on.
What to do if my Emerson DVD VCR Combo has no sound?
If there is no sound from your Emerson DVD VCR Combo, make sure the audio cables are firmly connected. Also, check that the power of the audio component is on, the audio output settings are correct, and the input settings on the audio component are properly configured.
What to do if my Emerson EWD2004 DVD VCR Combo cannot play a disc?
If your Emerson DVD VCR Combo cannot play a disc, first ensure that a disc is inserted. Then, clean the disc and place it correctly with the label side up. Finally, cancel the parental lock or change the control levels, and handle the disc with care to avoid fingerprints, scratches, or dust.
What to do if my Emerson EWD2004 DVD VCR Combo has no picture?
If your Emerson DVD VCR Combo shows no picture, ensure the video cables are firmly connected. Also, insert a correct video disc that plays on the unit. Press the DVD button on the remote control and check if the DVD OUTPUT light is lit, then try other DVD features.
What to do if TV programs cannot be seen normally on Emerson EWD2004 DVD VCR Combo?
If TV programs cannot be seen normally on your Emerson DVD VCR Combo, re-check the ANT. IN and ANT. OUT connections. Press the VCR/TV button. You may also need to press the VCR button on the remote control to activate it in the VCR mode and check if the green VCR OUTPUT light is lit, then set it to the TV position by pressing the VCR/TV button.
Why can't I change the audio or subtitle language on my Emerson EWD2004 DVD VCR Combo?
The audio or subtitle language cannot be changed on your Emerson DVD VCR Combo because the DVD does not contain audio source or subtitles in the selected language. This is not a malfunction.
Why does “Prohibited icon” appear on my Emerson EWD2004 screen?
The “Prohibited icon” appears on the screen of your Emerson DVD VCR Combo because the attempted operation is prohibited by the unit or the disc. This is not a malfunction.
What to do if I cannot view a tape but the audio is OK on my Emerson EWD2004 DVD VCR Combo?
If you cannot view a tape on your Emerson DVD VCR Combo but the audio is OK, head cleaning may be necessary. Also, make sure the VCR is not in the Menu mode.
What to do if my Emerson EWD2004 has no or poor playback picture?
If your Emerson DVD VCR Combo has no or poor playback picture, change the RF output channel to CH4 and select the same channel on your TV. Fine tune your TV.
Type | DVD VCR Combo |
---|---|
Video Format | NTSC |
Recording Formats | VHS |
Remote Control | Yes |
Playback Formats | DVD |
Connectivity | Composite Video Output |