Instruction Manual
D200126X012
2502 Controllers
June 2017
32
Key Description
83 Lock Washer, stainless steel (2 req'd)
84 Lock Washer, stainless steel
85 Cap Screw, stainless steel, not shown (4 req'd)
86 Machine Screw, stainless steel (2 req'd)
87* Link Bearing (not shown)
stainless steel (2 req'd)
88 Machine Screw (not shown),
stainless steel, (4 req'd)
89 Machine Screw, stainless steel, (2 req'd)
91 RESET Restriction Valve Ass'y
2502 and 2502C
2502F and 2502FC
93 Machine Screw, stainless steel
94 Bellows Frame, aluminum
95 Bellows Frame Base (not shown), steel, pl
96 Bellows Screw, brass, pl (2 req'd)
97 Bellows Stud (not shown), brass
98 Spacer, zinc
99 Cross Spring, stainless steel (2 req'd)
100 Calibration Adjuster, zinc
101 Reversing Block, zinc
180 Pipe Nipple (not shown) 2502F
and 2502FC, steel
181 Relief Tubing Ass'y, 2502F and
2502FC, stainless steel
182 Machine Screw, stainless steel, (2 req'd)
2502 and 2502C (not shown)
2502F and 2502FC
Key Description
183* O‐Ring (2 req'd), 2502F and 2502FC
184 Manifold, aluminum, 2502F and 2502FC
185 Manifold Nipple, aluminum, 2502F and 2502FC
186 Differential Relief Valve Ass'y, 2502F
and 2502FC
Standard
High temperature
187 Sleeve, plastic
188* 0‐Ring, 2502F and 2502FC
215 Nameplate, metal
Pipe Plug, 2502 and 2502C
Heat Insulator (figure 12)
Note
All Heat Insulator parts are included in the Heat Insulator Parts Kit.
35 Heat Insulator Assembly, stainless steel
36 Shaft Coupling, stainless steel
37 Shaft Extension, N05500
38 Set Screw, stainless steel (2 req'd)
39 Cap Screw, steel, pl (4 req'd)
40 Cap Screw, steel, pl (4 req'd)
53 Washer, carbon steel, pl (4 req'd)
*Recommended spare parts
Emerson Automation Solutions
Marshalltown, Iowa 50158 USA
Sorocaba, 18087 Brazil
Cernay, 68700 France
Dubai, United Arab Emirates
Singapore 128461 Singapore
www.Fisher.com
The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not
to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. All sales are
governed by our terms and conditions, which are available upon request. We reserve the right to modify or improve the designs or specifications of such
products at any time without notice.
E 2007, 2017 Fisher Controls International LLC. All rights reserved.
Fisher is a mark owned by one of the companies in the Emerson Automation Solutions business unit of Emerson Electric Co. Emerson Automation Solutions,
Emerson, and the Emerson logo are trademarks and service marks of Emerson Electric Co. All other marks are the property of their respective owners.
Neither Emerson, Emerson Automation Solutions, nor any of their affiliated entities assumes responsibility for the selection, use or maintenance
of any product. Responsibility for proper selection, use, and maintenance of any product remains solely with the purchaser and end user.
To Previous Page
Loading...
