Emerson Fisher 95H - Technical Specifications; Configurations, Sizes, and Connections; Pressure and Temperature Limits; Operational Settings and Weights

Types 95L, 95H, 95HP, and 95HT
2

Low-pressure regulator for 2 to 30 psig
(0,14 to 2,1 bar) outlet pressures
 High-pressure regulator for 5 to 150 psig
(0,34 to 10,3 bar) outlet pressures
High-pressure regulator for
15 to 400 psig (1,0 to 27,6 bar) outlet pressures
(soft-seated)
High-pressure/high temperature
regulator for 15 to 300 psig (1,0 to 20,7 bar) outlet
pressures (metal seat) and up to 650°F (343°C)

1/4-inch (6,4 mm) orice
3/8-inch (9,5 mm) orice

9/16-inch (14 mm) orice

1-1/16-inch (27 mm) orice

NPT, ASME anged; all sizes are fabricated with
slip-on anges and are 14-inches face-to-face
(EN anged-356 mm face-to-face), CL150 RF,
CL300 RF, PN 16/25/40, or SWE.


See Table 2

See Table 1



 
Nitrile (NBR)
Neoprene (CR)
Fluorocarbon (FKM)
(3)
Ethylenepropylene (EPDM)
Peruoroelastomer (FFKM)
Polytetrauoroethylene (PTFE)
Stainless Steel
-40° to 180°F
-40° to 180°F
0° to 300°F
-40° to 275°F
0° to 425°F
-40° to 400°F
-40° to 650°F
(-40° to 82°C)
(-40° to 82°C)
(-18° to 149°C)
(-40° to 135°C)
(-18° to 218°C)
(-40° to 204°C)
(-40° to 343°C)
1. The pressure/temperature limits in this Instruction Manual, and any applicable standard or code limitation should not be exceeded.
2. Pressures and/or the body end connection may decrease these maximum temperatures.
3. Fluorocarbon (FKM) is limited to 200°F (93°C) hot water.







Type 95L
Type 95H
Cast Iron
Steel
Stainless Steel
-40° to 406°F (-40° to 208°C)
-20° to 450°F (-29° to 232°C)
-40° to 450°F (-40° to 232°C)
Type 95HP
Steel
Stainless Steel
-20° to 450°F (-29° to 232°C)
-40° to 450°F (-40° to 232°C)
Type 95HT
Steel
Stainless Steel
-20° to 650°F (-29° to 343°C)
-40° to 550°F (-40° to 288°C)


NPS 1/2 (DN 15) body has a
handwheel, all other sizes have tee handles.

Internal

Class IV
Class VI or better
Class IV


NPS 1/4 body: 4 pounds (2 kg)
NPS 1/2 (DN 15) body: 8 pounds (4 kg)
NPS 3/4 and 1 (DN 20 and 25) bodies:
20 pounds (9 kg)
NPS 1-1/2 and 2 (DN 40 and 50) bodies:
73 pounds (33 kg)

NPS 1/4 body: 6 pounds (3 kg)
NPS 1/2 (DN 15) body: 12 pounds (5 kg)
NPS 3/4 and 1 (DN 20 and 25) bodies:
32 pounds (15 kg)