Emerson Fisher EZH Series - Spare Parts; Parts List

28
Types EZH and EZHSO
Europe, Middle East and Africa Only
KEY DESCRIPTION QUANTITY DN 25 DN 50 DN 80 DN 100
Standard spare parts (Figures 16, 17, 18, 19, 20)
Type EZH OS2 kit - 197569 197570 197571 197824
Type EZH kit - 197575 197576 197577 197826
Type EZHSO OS2 kit - 197889 197890 197891 197908
Type EZHSO kit - 197895 197896 197897 197907
Slam-shut installation kit - 197785 197786 197787 197827
Type OS2 release relay - Refer to D103683X012 Instruction Manual
KEY DESCRIPTION QUANTITY
TYPES EZH AND
EZHSO DN 25
TYPES EZH AND
EZHSO DN 50
TYPES EZH AND
EZHSO DN 80
TYPE EZH
DN 100
TYPE EZHSO
DN 100
Optional spare parts (Figures 16, 17, 18, 22)
2
Standard regulator seat 1 GD29726X012 GD29581X012 GD29732X012 M0303250X12 ERAA00273A0
Seat reduction 1 1 M0300940X12 M0300950X12 M0300960X12 M0303430X12 ERAA00274A0
Seat reduction 2 1 M0300910X12 M0300920X12 M0300930X12 M0303420X12 ERAA00275A0
Seat reduction 3 1 M0300710X12 M0300720X12 M0300730X12 M0303410X12 ERAA00276A0
161 Silencer (Whisper III) 1 ERAA00238A0 GE37959X012 GE38021X012 M0303520X12 M0303520X12
Pilot spare parts
4, 5, 14, 17,
18, 22, 25, 28
Type PRX kit (Figure 24) 1 M2200685X12 - - - - - - - - - - -
6, 12, 13,
15, 18
Type SA/2 kit (Figure 25) 1 M2200250X12 - - - - - - - - - - -
Table 11. Spare Parts
R119
PARTS LIST
Type EZH (Figures 16, 17, 18, 19)
Key Description
1 Body
2 Seat
3 Cage
4* Anti-friction ring
5 Actuator lower casing
6 Cap screws
7* O-ring
8* Anti-friction ring
9* O-ring
10 Pipe Plug
11 Actuator upper casing
13 Spring
14 Sleeve
15* O-ring
16 Screw
17* O-ring
18 Inlet plate
19 Outlet plate
20* Diaphragm
21 Screw
22 Washer
23 Nut
24 Screw
25 Intermediate ange
27 Sleeve adaptor
28* O-ring
29* O-ring
30* Disk holder assembly
31 Disk retainer
32 Lock washer
Type EZH (Figures 16, 17, 18, 19)
Key Description
33 Socket head cap screw
34* O-ring
35 Bracket
38 Travel indicator plug
44 Adjusting screw cap
61 Sleeve guide
62* O-ring
63* O-ring
64* O-ring
66 Screw
67* Washer
68 Smart screw
69* O-ring
70 Cap
71* O-ring
72 Lock washer
73 Upper spring seat
74 Socket head cap screw
75* O-ring
77 Screw
82 Lower spring seat
83 Ball bearings
138 Indicator cover
139 Stem
140 Indicator bushing
141 Fitting
142* O-ring
143* O-ring
144 Spring collet
145 Retaining ring
192 Nameplate
196 Washer
197 Seat Adaptor
198 O-ring
* Spare parts kit
SPARE PARTS
Different parts of the equipment are subject to normal
wear: they must be checked periodically and replaced
if necessary.
The frequency of control and replacement of parts depends
on the working conditions as well as any applicable codes
and regulations.