Emerson GO Real-Time User Manual

8
The form factor of the GO Real-Time 4G/5G Tracker
promotes its use in a variety of scenarios including at the
pallet, carton and product level.
Device Placement Scenarios
Pallet Level - Many customers apply trackers to the side of a
pallet. Emerson provides signage and clear plastic pouching
to facilitate locating labels on pallets at the receiving end as
depicted in the photo to the right. Many customers place
several trackers on different pallets within a load to perform
temperature monitoring. This promotes broader sampling
and provides more detailed information on the temperature
uctuations experienced within a container.
Placement - The devices are like disposable cell
phones with a thermometer. They cannot be
placed inside of a pallet or carton because that
will block the cell signal. We recommend placing
the GO Real-Time 4G/5G Tracker products on the
outside of the pallet closest to the back doors. If
the shipment has multiple drops place unit on the
top of the pallet of the last drop or inside wall of
the trailer closest to the back doors. We do not
recommend placing devices on the side of a pallet
between pallets because that can also cause the
signal to be blocked.

Emerson GO Real-Time Specifications

General

Brand	Emerson
Model	GO Real-Time
Category	GPS
Language	English