GD230M (GO Tracker 2.1) User Manual
3
2. Product Specifications and Operation
2.1. Basic Feature Set
• Single Use
• Operating range: -20C to 60C with a target of -30C for low temps
• Temp+Humidity
• Shock, Tilt (Device reports X, Y, Z values. Server does further processing)
• LUX
• Location - Queclink QLM100 tower information
• Single SIM, Nano SIM – size SIM card
• Pull Tab to start. No on/off button
• Micro USB charging port on bottom of unit, also used for redundant data transmission
• LEDs
2.2. Transmit Mode
• CAT.M1, CAT.NB2, EGPRS.
• Micro USB will allow for manual data download with cellular signal not available. Note same
Micro USB will enable recharging during recycling process.
2.3. Activation
• Pull Tab which connects the battery power to the unit.
• Visual indication of successful activation: LEDs flash.
2.4. Reporting Interval
• Models can be configured to 6, 6, 18 (record every six minutes and report every 18 minutes)
and 60, 60 (record and report every 60 minutes)
• During “emergency mode,” where shipments are lost or stolen, interval changes to the
minimum interval allowed by technology. (1 minute)
2.5. Internal Sensors
Accelerometer – 3 axis accelerometer
Temperature
Humidity
LUX (light)
2.6. Color
Color of the plastic housing:
GO Real-Time 4G/5G – White
3. Installation Precautions
Firmly install the device to a reliable surface to prevent falling off.
Do not install the device under metal surface or in enclosed environments having
To Next Page
Loading...
Need help?
General
