Emerson GO Tracker 2.1 User Manual

GD230M (GO Tracker 2.1) User Manual
5
4. Troubleshooting and Safety Info
4.1. Troubleshooting
Table 2. 1.1. GD230MG (GO Tracker 2.1) Troubleshooting List
Trouble
Possible Reason
Solution
Messages can’t be
reported to the backend
server by network.
APN is not right.
Ask the network operator for
the right APN.
The IP address or port of the
backend server is wrong.
Make sure the IP address for
the backend server is an
identified address in the
internet.
There is no response from
USB port when the device
is configured by using USB.
The port is not ready or the
device is not powered on.
Please check the port and the
device to ensure they are
working properly.
4.2. Safety Info
 Do not disassemble the device by yourself.
 Do not put the device in the overheated place. Too high temperature will damage the
device or even cause battery explosion.
 Do not use the device on the airplane or near medical equipment.

Emerson GO Tracker 2.1 Specifications

General

Brand	Emerson
Model	GO Tracker 2.1
Category	GPS
Language	English