Emerson LC407EM1

26
EN
Font Style
Closed Captioning font style
can be changed as illustrated.
Font Size
Font size of the displayed
caption can be switched as
illustrated.
Font Color
Font color of the displayed
caption can be switched as
illustrated.
Font Opacity
Font opacity of the displayed
caption can be switched as
illustrated.
Background Color
Background color of the
displayed caption can be
switched as illustrated.
Background Opacity
Background opacity of the
displayed caption can be
switched as illustrated.
Edge Color
Edge color of the displayed
caption can be switched as
illustrated.
EdgeType
Edge type of the displayed
caption can be switched as
illustrated.
8 Press MENU to exit,
Note
Closed caption will not be displayed when you are using an HDNll
connection.
To show the closed caption on yourTV screen, broadcast signal must
contain the closed caption data,
Not alITV programs and commercials have the dosed caption or all types
of the closed caption,
Captions and texts may not exactly match theTV voice,
Changing channels may delay the closed caption for a few seconds.
Adjusting or muting the volume may delay the closed caption for a few
seconds.
Abbrevia±ions, symbols and other grammatical shortcuts may be used in
order to keep pace with the on screen action.This is not a malfunction,
Tiye caption or text ciyaracters will not be displayed while the main menu
or functions display is siyown,
if a black box appears on the TV screen, this means tha± the closed caption
is set to the text mode,To cleat- the box, select [CC-1], [CC-2], [CC-3],
[CC-4] or [Off].
if the unit receives poor quality television signals, the captions may contain
errors, or there might be no captions a± all, Sorne possible causes of poor
quality signals are:
-Automobile ignition noise
- Electric motor noise
- Weak signal reception
- Multiplex signal reception (ghosts or screen flutter)
- Data dropout and Pixelalion (for DTV only)
The unit retains the dosed caption setting if the power fails.
When the unit receives special effects playback signal (e.g, Search, glow
and Still) fi-om sVCR's video output channel (ch3 or oh4), the unit may not
display the correct caption or text,