37
EN
DVD SETTINGINTRODUCTION WATCHING TVPREPARATION
INITIAL SETTING
OPTIONAL SETTING TROUBLESHOOTING INFORMATION
OPERATING DVD
Black Level Setting
DVD
Adjust the black level to make the dark areas of the TV picture brighter.
1
During playback, press [MODE] repeatedly until
“ “ appears.
OFF (BLACK LEVEL)
2
Use [Cursor K / L] to adjust the black level.
or
ON (BLACK LEVEL)
ON : Makes the dark areas brighter.
OFF : Shows the original picture as recorded.
3
Press [RETURN
] to exit.
Note:
• The setting will be kept even if the unit is turned off.
Stereo Sound Mode
CD
This unit allows you to select a sound mode during audio CD playback.
During playback, press [AUDIO ] repeatedly until the
desired sound mode appears.
STEREO
• Each time you press [AUDIO ], the sound mode
changes as example below.
STEREO
(stereo sound with left and right channels)
L-ch (left channel sound only)
R-ch (right channel sound only)
Virtual Surround
You can enjoy virtual surround on your existing 2 channel stereo system.
1
During playback, press [MODE] repeatedly until
“ “ appears.
OFF (SURROUND)
2
Use [Cursor K / L] to select the sound level.
or
1 (SURROUND)
1 : Natural effect
2 : Emphasized effect
OFF : No effects (original sound)
3
Press [RETURN
] to exit.
Note:
• The setting will be kept even if the unit is turned off.
• For audio CD, virtual surround will not be effective if the
sound mode is set to something other than “STEREO”.
(Refer to “Stereo Sound Mode” on page 37.)
• Turn down the level or select “OFF” if the sound is distorted.
A84N3UH_A84N1UH_LD195EM8 2_LD19537 37A84N3UH_A84N1UH_LD195EM8 2_LD19537 37 2008/02/15 14:31:532008/02/15 14:31:53
To Next Page
Loading...
