11
LISTENING TO THE RADIO
1.) Slide the FUNCTION selector to the TUNER position.
2.) Slide the BAND selector to the desired band, FM or AM.
3.) Tune to your desired station with the TUNING control. If you have tuned to a
FM Stereo station the FM STEREO LED Indicator will light.
4.) Adjust the VOLUME control and EQ as desired.
5.) When you are finished listening press the POWER button to shut the power
‘Off’.
Antenna Information
AM – The AM antenna is inside the cabinet. IF AM reception is unsatisfactory try
rotating the entire unit until you find the position that provides the best reception.
FM – For best FM reception, the FM lead wire antenna, located on the back of the
set, should fully unwound and extended.
NOTE: If you are listening to a weak FM Stereo station you can usually improve
the reception by pressing the FM MONO selector to the ON position, however
the sound will now be mono.
FM Wire Antenna
MS9903TT_082205.p65 22/8/2005, 16:1111
To Next Page
Loading...
