To Next PageTo Next Page
Need help?Do you have a question about the Emerson PS48300-3C/1800 and is the answer not in the manual?
General| Model | PS48300-3C/1800 |
|---|---|
| Input Voltage | 85-300 VAC |
| Output Voltage | 48 VDC |
| Output Current | 37.5 A |
| Output Power | 1800 W |
| Power Rating | 1800 W |
| Cooling Method | Forced Air |
| Protections | Overvoltage, Overcurrent, Overtemperature |
| Operating Temperature | -40 to +65 °C |
Covers electrical hazards, voltage precautions, and tool usage.
Details risks associated with short circuits and necessary preventive measures.
Provides essential precautions for handling and operating batteries safely.
Addresses general safety for sharp objects, cable connections, and signal lines.
Explains the naming conventions and components of the NetSure power supply models.
Describes the system's internal structure, including rectifiers and monitoring modules.
Highlights key technological aspects, efficiency, and protective designs of the system.
Mandatory safety rules for personnel during the installation process.
Steps for unpacking, inspection, and cable selection prior to installation.
Procedures for physically mounting the power supply system in a cabinet.
Covers connecting power cables (AC, battery, load) and signal cables.
Details on optionally connecting a modem for remote monitoring capabilities.
Steps for performing pre-startup checks, preparations, and the initial system startup.
Configuration of monitoring module parameters based on the system's actual setup.
Verifying alarm triggers and monitoring system operational status.
Concluding tasks like disconnecting test equipment and final handover.
Overview of the M500D module's display, keypad, and indicators.
Steps for powering on the system and configuring the monitoring module.
Methods for retrieving and viewing real-time system operational data.
