Need help?Do you have a question about the Emerson SKBD200150 and is the answer not in the manual?
General| Input Voltage | 200-240V |
|---|---|
| Output Voltage | 0-240V |
| Horsepower | 2 HP |
| Amperage | 7.5 A |
| Phase | Single Phase |
| Output Current | 7.5 A |
| Efficiency | 98% |
| Protection | Overload, Overvoltage, Undervoltage, Short Circuit |
Defines warning, caution, and note symbols used for safety and operational information.
General warning about severe electrical shock risks from drive voltages.
Guidance on safe system design, installation, commissioning, and maintenance by trained personnel.
Guidelines for motor installation, speed operation, and overheating protection.
Use of brake control functions and safety considerations for injury risk.
Guidelines for safely performing electrical installation of the drive.
Requirements for drive enclosure, preventing access and contamination ingress.
Information on fire protection, enclosure types (NEMA 12), and baffle construction.
Illustration of the drive's features, including display, ports, and terminals.
Diagrams for connecting power terminals on size A and sizes B, C, D drives.
Requirement for suitable overload and short circuit protection for AC supply.
Warning about high temperatures of braking resistors and overload protection.
Details on ground leakage current with and without internal EMC filter.
Information and guidelines related to Electromagnetic Compatibility (EMC).
Recommendation to keep the internal EMC filter and its function for emission reduction.
Instructions and diagrams for removing and re-fitting the internal EMC filter.
Additional EMC precautions for stringent requirements, including external filters and shielded cables.
Warnings and specifications for connecting external control circuits to the drive terminals.
Step-by-step guide for navigating and modifying drive parameters using the keypad.
Description of parameter access levels (L1, L2, L3) controlled by Pr 10.
Procedure for setting, unlocking, and managing security codes for parameter access.
Steps to set a security code for view-only access to parameters.
Steps to unlock a previously set security code.
Procedure for resetting drive parameters to factory default settings.
Detailed descriptions of Level 1 parameters, including function, range, and defaults.
Configuration of drive operation modes like Voltage/Current input, Keypad, PID, HVAC.
Parameter to set the motor's rated current for overload protection.
Parameter to set the motor's rated full load speed for slip compensation.
Parameter to set the motor's rated voltage for base frequency application.
Parameter to set the motor's rated power factor (cos φ).
Controls access levels (L1, L2, L3, LoC) to drive parameters.
Detailed descriptions of Level 2 parameters, including function, range, and defaults.
Selects the logic for start/stop control using terminals and latching options.
Enables and configures the mechanical brake control features.
Determines the input mode for terminal T2 (Analog Input 1).
Used to set up a user security code for parameter access.
Enables copying of drive parameters to/from a SmartStick.
Loads default parameter sets (Euro or USA) into the drive.
Selects the ramp mode for acceleration and deceleration control.
Selects the method for stopping the motor (coast, ramp, DC injection).
Enables and selects the type of motor autotune.
Sets the motor's rated frequency for voltage to frequency ratio.
Specifies the number of poles for the motor.
Selects the voltage mode for motor control, including autotune options.
Parameters for controlling brake release and apply based on current and frequency.
Detailed descriptions of Level 3 parameters, including function, range, and defaults.
Read-only parameters for diagnosing drive faults and conditions.
Minimum required control terminal connections for European default settings.
Minimum required control terminal connections for keypad control.
Inputting motor data such as current, speed, voltage, and power factor.
Procedure for performing non-rotating autotune on the motor.
List of trip codes, their conditions, and possible causes for drive faults.
List of available documentation for Commander SK drives.
UL listing information and file number for Commander SK drives.
Conditions for UL listing conformity, including wire type, temperature, and enclosure.
Details on drive's motor overload protection level and parameter setting.
Information on the drive's overspeed protection capabilities.
To Next Page