Need help?Do you have a question about the Emerson SKC3400400 and is the answer not in the manual?
Information essential for avoiding hazards and risks.
Warning about severe electrical shock and burns from drive voltages.
Drive as a component for professional incorporation, requiring trained personnel.
Brake control functions are not for safety functions, require independent protection.
Details on electrical installation, including shock risk and isolation.
Rating data for 1-phase, 100-120Vac drives.
Rating data for 1-phase, 200-240Vac drives.
Rating data for 1 & 3-phase, 200-240Vac drives.
Diagrams showing power terminal connections for different drive sizes.
Specification of control terminals and I/O, including insulation and SELV warnings.
Procedure for selecting and changing drive parameters.
Setting and unlocking security codes for parameter access.
Descriptions of basic drive setup parameters (Pr 01-10).
Setting Pr 05 automatically configures drive setup.
Setting the motor rated current for overload protection.
Descriptions of advanced drive parameters (Pr 11-60).
Configuring digital/analog outputs and performing autotune.
Descriptions of advanced parameters for setup.
Read-only parameters for fault diagnosis.
Minimum required control terminal connections for European settings.
Setting speeds, rates, and motor nameplate details.
Steps to prepare for and perform motor autotune.
Minimum required control terminal connections for USA settings.
List of trip codes, conditions, and possible causes.
To Next Page
General