10
Year Display Adjustment
To view the correct year, press the MONTH /
DATE and TIME ZONE buttons together. The
display changes from Time to Year. When you
release the MONTH / DATE and TIME ZONE
buttons the display returns to the correct Time.
Setting The Year: Hold the MONTH / DATE and TIME ZONE buttons
together. At the same time press the
Day of Week Display Setting
The display will show the Day of Week at the botto m of t he LED Display.
The Day of Week automatically sets after the month / day setting.
Manual Time Adjustment
Daylight Savings and Leap Year Adjustments
Some people like to set their clocks 5 to 10
minutes fast to make sure that they will always be
on time. Even though the SmartSet
®
sets the time
by itself, you still have the option of adjusting the
time manually if you wish.
Setting the time: Press the POWER button to the off mode, hold the CLK
ADJ button and then either the
backward as desired. Each press of the
time by one minute. If you hold the buttons the display time will
change slowly at first, if you continue holding the buttons the
display digit will change rapidly.
Note: If you manually adjust the time your new setting is entered into the
SmartSet
®
memory. If the power is interrupted, the display will return to
your new time setting, not the original setting, when the power is restored.
Dimmer Control
If you find the display to be too bright for sleeping, slide the DIMMER selector
switch to the LOW position. The display DIMMER selector switch is located on
MON
AM
buttons to set the correct year.
or
buttons to adjust time forward or
or
buttons will change the display
or
or
or
All Daylight Savings and Leap Year adjustments are made automatically by the
SmartSet
®
internal computer as follows:
• Start of Daylight Savings Time:
At “2:00 AM” on the 2nd Sunday in March, the clock will automatically advance
to “3:00 AM”.
• End of Daylight Savings Time:
At “3:00 AM” on the 1st Sunday in November, the clock will automatically
reset to “2:00 AM”.
• Leap Year:
At “12:00 Midnight” on February 28
th
, the calendar display will change to “2 29”.
the left of the side cabinet.
To Next Page
Loading...
Need help?
General
