EMERYMARK EMP 200 - Machine Operation Guide; Control Panel Overview

51
Instalation
2.1 Control panel
1. Knob to turn on pump.
2. Knob to turn on compressor.
3. Main switch.
4. Piston ignition selector button for the
movement of the molds.
Turn on the equipment with the main switch, then turn on the pump, then the compressor, it
can not turn on if the pump is not turned on.
When you nish using the equipment, rst turn off the compressor, then the pump and nally
the main switch.
EMP-200
EMP-500
EMP-1500
EMP 3000
BOMBA
COMPRESOR
PISTÓN
1
2
3
4
SET
REFRIGD EFROST
MT-512Ri
2. Operation