48
Assistance levels and Walking Assistant mode
Press the “+” and “-” keys to change the level of pedaling assistance provided
by the motor; 5 levels of assistance are available which correspond to a greater
or lesser thrust from the motor.
Rear light on/o
It is necessary to turn the rear light on and o manually.
Press the key indicated in the figure to turn the light on and o.
On/o key
La e-bike andrà alla velocità uniforme di 6 km/h e mostrerà
il simbolo “P” sul display.
Per disattivare la spinta, rilasciare il tasto GIU’.
Avvertenze:
non utilizzare la modalità cruise control quando la e-bike
non ha contatto con il suolo.
Non utilizzare i pedali mentre si è in modalità “cruise
control”
Accensione / spegnimento luci
Per accendere / spegnere le luci della e-bike, premere il
tasto SU per 2 secondi.
Holding down the “-” key activates the Walking Assistant mode which provides
help for moving the bicycle by hand in case of need (for example in the event of a
puncture).
Selezione livello d’assistenza della pedalata
Il livello d’assistenza indica l’output di potenza del motore.
Il livello di default è “1”.
I livelli variano da “0” (nullo) a “5” (massimo).
Per aumentare / diminuire il livello d’assistenza, premere i
tasti SU / GIU’.
Indicatore livello di batteria
Le 5 barre rappresentate nell’immagine successiva indicano
la capacità della batteria.
Quando la batteria sta per scaricarsi, l’icona delle barre
Assistance level set
Walking Assistant
mode active