3. Press or to select „MACRO1”, „MACRO2” or „MACRO3” and confirm by
OK key.
4. Press or to select „DELETE” „SURE DELET“ appears, confirm then by
OK key, LCD shows “Success!”, exit to the normal mode by pressing the EXIT key.
SET UP THE CLOCK
You can set up the clock on your remote control and the time will be displayed
1. Press and hold the SET key on your remote control for more than 3 seconds,
then release it.
2. Press the or keys to select “CONFIGURE” on LCD menu, confirm by
OK key.
3. Press the or keys to select “Time Setup” on LCD menu, confirm by OK
key.
4. Press the or key to select desired setup items such as “Hour, Minute, AM
or PM“, then enter value by the digit keys, confirm then by OK key.
5. LCD shows “Success!”, this finishes the set-up.
VOLUME LEVEL LOCK
This function makes it very convenient when you only use one device to adjust volume.
For example, you may use your amplifier as your main volume control, then you can
use this function to fix the volume and mute key of AUX, no matter which device you will
use (even you will use TV, DVD, VCR etc), the volume and mute key on remote control
still control the volume and mute of your amplifier.
1. Press and hold the SET key on your remote control for more than 3 seconds, then
release it.
2. Press the or keys to select “CONFIGURE” on LCD menu, confirm by
OK key.
3. Press the or keys to select “VOL Lock” on LCD menu, confirm by OK
key.
4. Press DEVICE key to select the device (e.g. AUX).
5. Press the
or key to change to the ON or OFF mode, confirm by OK key.
6. LCD shows “Success!”, this finishes the set-up.
DEVICE LOCK
You can use Device lock function to fix current device code. This device code cannot be
changed by brand and code set up or auto search. You can set it to the Off to cancel
this function.
1. Press and hold the SET key on your remote control for more than 3 seconds, then
release it.
To Next Page
Loading...