Need help?Do you have a question about the Emheater EM15-G1-2d2 and is the answer not in the manual?
Covers critical safety warnings for installation, wiring, power-on, operation, and maintenance.
Provides general precautions for motor testing, thermal protection, operating limits, and input voltage.
Specifies suitable environmental conditions and installation location requirements for the inverter.
Highlights critical wiring precautions for power supply, motor, grounding, and interference.
Explains the operating keypad layout, display areas, and indicator functions.
Describes the three-level menu structure for navigating and changing function codes.
Guides on performing motor auto-tuning for optimal vector control performance.
Covers fundamental parameters like motor type, control mode, and frequency source selection.
Describes the configuration and functions of digital and analog input terminals.
Details the configuration and functions of FMP, relay, and other digital output terminals.
Configures motor overload, phase loss, voltage, and other protection parameters.
Details parameters for PID control, including setting sources, feedback, and gains.
Covers essential motor parameters for asynchronous and synchronous motors.
Configures parameters for vector control, including speed/torque control and PI gains.
Lists common fault codes, possible causes, and troubleshooting solutions for inverter errors.
Provides a table for simple fault analysis and corresponding solutions during inverter use.
Configures motor overload, phase loss, voltage, and other protection parameters.
Covers essential motor parameters for asynchronous and synchronous motors.
To Next Page
General