Remote Centre| Operation
Tem#erature adiuetment in AUTO SELECT mode
To adjust the air temperature during AUTO SELECT
mode, point the remote control toward the indoor air
conditioning unit:
1) Press the
1°C or 1°F.
button once, to raise the set point
2) Press the \./button once, to reduce the set
point temperature 1°C or 1°F.
COOL/HEAT & FAN/DRY mode
Point the remote control toward the indoor air condition-
ing unit:
1) Press the ON/OFF ,_ button.
2) Press the MODE O button, select the mode of
operation; COOL, DRY, HEAT/FAN or AUTO.
A
3) Press the _ or to set the desired tem-
perature.
Once minimum or maximum setting is reached
operation will be continued by
pressing or
4) Press the FAN SPEED O button to set the de-
sired air flow rate.
Press the ON/OFF _i_ button again to stop.
F" ",,
SL_E_ OUTFLf_P _{3_
( LbdZb
_'TOST4_t I_ FLAP_,_ gf_t,*_
J
Notes:
* In the COOLING-ONLY operation, the HEAT
mode will disable, and it will go to FAN mode.
* The settings can be changed even while the air
conditioner is off.
To Next Page
