Need help?Do you have a question about the Eminent EM4590 and is the answer not in the manual?
List of items included in the EM4590 package for initial setup.
Steps for connecting the device via network cable and accessing the Control Panel.
Configuring static IP address settings in your computer for accessing the repeater.
Logging into the repeater's web interface using its IP address and default credentials.
Provides information on firmware, operation mode, and wireless network settings.
Shows TCP/IP configuration details and network traffic statistics.
Choosing the 'Wireless Repeater Mode (Station)' option within the setup wizard.
Starting the 'Repeater OneKey Setting' feature in the wireless setup wizard.
Identifying and selecting your existing wireless network from a list of available SSIDs.
Inputting the security key or password for your target wireless network.
Saving the configured settings and initiating the repeater's restart process.
Checking if the EM4590 has successfully connected to the wireless router.
General| Maximum data transfer rate | 300 Mbit/s |
|---|---|
| Connectivity technology | Wireless |
| Ethernet LAN (RJ-45) ports | 1 |
| Networking standards | IEEE 802.11n, IEEE 802.11b, IEEE 802.11g |
| Security algorithms | 128-bit WEP, 152-bit WEP, 64-bit WEP, WPA-AES, WPA-TKIP |
| LED indicators | Yes |
| Harmonized System (HS) code | 85176990 |
To Next Page
