First install the mounting bracket before placing the motion detector in the bracket.
Point the detector in the direction you wish to secure. Test if the motion detector is
working properly in test mode.
6.0 Test the motion detector
After you fully installed the motion detector and the self-test is completed you can test
the motion detector by walking within the range of the motion detector from one side to
the other side. The LED indicator of the motion detector will flash if motion is detected.
Adjust the motion sensor to get the best results. And repeat the test.
7.0 Frequently Asked Questions and other related
information
The latest Frequently asked questions for your product can be found on the support
page of your product. Eminent will update these pages frequently to assure you have
the most recent information. Visit www.eminent-online.com
for more information about
your product.
Downloaded from www.vandenborre.be
To Next Page
Loading...