EasyManua.ls Logo

Eminent EM8690 - Connecting to the Alarm Panel

Eminent EM8690
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4 | ENGLISH
Remark : It’s recommended to install detectors that needs to be operational 24-hours,
for example smoke detectors, in the 24-hours-group.
4.0 Connect to the alarm panel
Enter the password en press the memo button on the alarm panel. Press the test
button of the smoke detector within 15 seconds. The alarm panel will give a short
beep. This means the smoke detector is successfully connected. If the alarm panel
beeps twice, this means the smoke detector was already connected.
24-hours-group
Home-group
Normal-group
Single-group