Need help?Do you have a question about the emitor DIGISAT PRO and is the answer not in the manual?
General| Demodulation | QPSK, 8PSK |
|---|---|
| Type | Digital Satellite Receiver |
| Connectors | HDMI, RCA, USB |
| Supported standards | DVB-S2 |
| Video resolution | Full HD 1080p |
| Tuner Type | DVB-S2 |
| Input Frequency Range | 950MHz - 2150MHz |
| DiSEqC | 1.0, 1.1, 1.2, USALS |
| Video Decoding | H.264 |
| Audio Decoding | MPEG-1 Layer 1, 2 |
| Video Output | HDMI, RCA |
| Audio Output | HDMI, RCA |
| USB Port | Yes (2.0) |
| Power Supply | 12V DC |
Explains how to connect the DIGISAT PRO to single or dual LNBs for signal strength reading.
Displays signal strength, voltage, and current draw for connected devices.
Shows voltage, current draw, and 22 kHz tone status from the satellite receiver.
To Next Page