Name: EMKO TRANS-AMF
Brand: EMKO
Rating: 4 (1 reviews)

To Next Page

IntroductionBrochure.ENGTRANS-AMF01V4802/20

TRANS-AMF

AUTOMATICMAINSFAILUREUNIT

1.2Warranty

EMKO Elektronik warrants that the equipment delivered is free from defects in material and workmanship.

This warranty is provided for a period of two years. The warranty period starts from the delivery date. This

warranty is in force if duty and responsibilities which are determined in warranty document and instruction

manual performs by the customer completely.

1.3Maintenance

Repairs should only be performed by trained and specialized personnel. Cut power to the device before

accessing internal parts.

Do not clean the case with hydrocarbon-based solvents (Petrol, Trichlorethylene etc.). Use of these

solvents can reduce the mechanical reliability of the device. Use a cloth dampened in ethyl alcohol or

water to clean the external plastic case.

1.Introduction

1.1GeneralSpecifications

Theunitprovidesforautomatictransferofaloadfrommainstogeneratorintheeventofamains

failure.Intendedforunattendedoperation,itisabletodetectfailureofanyphaseofthemainsandto

startandswitchovertoageneratorifthemainsvoltagegoesoutsidepre-setlimits.Bothautomatic

andmanualcontrolispossible. A testmodeisalsoavailablewhichallowsthegeneratortoberun

withouttakingtheload.

TheunithasDualWorkingfeature.Intheeventofamainsfailure,groupwithhighprioritystartsand

takestheload.Ifbothgroupshasnopriority,thegroupwithlessworkinghourwillstartandtakethe

load. TouseDualWorkingfeatureDualSetexpansionmodulemustbeused.

TheunitcalculatesengineRPMfromMagneticPickupsensor(MPU)and/orgeneratorvoltagesignal.

TheunitmonitorsJ1939ECUmessagesandprovidesremotestart/stopcontrolviaJ1939protocol

(supportedECUs:VolvoEMS2,VolvoEDC4,Perkins,ScaniaS6,MANMFRandstandardmessages).

The unit monitors generator operation and gives warning of any faults that are detected.

The configurable input-3 can be used as the water level sensing input.

The configurable input-7 can be used as the cabin temperature analog input.

The unit has got the “Event Log” that will record last 500 events.

EMKO TRANS-AMF Manual

Other manuals for EMKO TRANS-AMF