Emmaljunga NXT90 Select - Check the Functions of the Chassis;Seat Unit;Carrycot; Overall Inspection of the Product; Wheels and Brakes

55NXT SELECT V1.0
EN
Delivery Check - NXT SELECT
1 pc Folded chassis
1 pc Tray/Basket
2 pc Swivel wheels
2 pc Wheels
2 pc Axle shafts
1 pc Instruction manual
1. Check that the following items are present in the correct numbers:
Chassis
2. Check the functions of the chassis/seat unit/carrycot:
Unfold the chassis.
Check the function of the chassis , that the two locking clips lock properly on both sides.
Check that the seat/carrycot click on the chassis and it locks on both sides.
Check the 5 point safety harness on the seat unit by checking that it locks into place.
Check the telescopic height adjustment by lifting/pulling the handle up and down, the handle-
bars should be checked that they lock in each position.
Check that the back rest can be adjusted and locked into each position.
Check that the footrest on the seat unit can be adjusted and locked into each position.
3. Wheels and brakes:
Lubricate the ends of the axles.
Attach the wheels and make sure that the wheels lock into position.
Check that the parking device locks both rear wheels when engaged.
4. Overall inspection of the product:
Check that all rivets, screws and nuts are securely fastened.
Check that all press studs and zips on the seat fabrics and the tray/basket
are correctly and securely attached.
Make sure that there are no other visible differences on the chassis, seat
fabrics, tray/basket and wheels.
Carrycot
Seat unit Ergo
Seat unit Flat
1 pc Carrycot
1 pc Apron for carrycot
1 pc Mattress
1 pc Seat unit Ergo with seat unit fabrics
incl 5-point harness
1 pc Hood
1 pc Bumper Bar
1 pc Seat unit Flat with seat unit fabrics incl
5-point harness
1 pc Hood
1 pc Bumper Bar