Assembly and use of the chassis
UNFOLDING THE CHASSIS
• Release the transport catch by releasing the grey clip.
To do this squeeze the chassis together.
WARNING
• There must not be a child in the pram when it is folded
or unfolded.
• Avoid having children in the vicinity when the pram is
folded or unfolded.
• Ensure that children are kept away from all moving parts
of the pram to avoid risk of injury.
WARNING
• If the open padlock is visible, the chassis is NOT locked.
• If the open padlock icon is visible, press down on the metal bar,
the chassis locks and you will hear ‘click’. Never use the stroller
if the symbol with the open padlock is visible.
• Pull out the telescopic handle.
• Lock both grey clicks on the right and left of the handlebars.
Make sure that the telescopic handlebar clips are properly
locked with a ”click”.
• Make sure that the handlebar is at the same height on both
sides before you lock into place.
WARNING
• Ensure that children are kept away from all moving parts if
you adjust the pram to avoid risk of injury.
• Adjust the handle by pressing the grey buttons on the outside of
the handlebar. Make sure that they click into position.
WARNING
• Ensure that children are kept away from all moving parts if
you adjust the pram to avoid risk of injury.
ASSEMBLY OF THE BACK WHEELS
• Wipe dirt from the axles before you put on the wheels.
• Press the button on the rear wheel. Insert the metal shaft axle
in the rear wheel.
• Ensure that the shaft clicks into the wheel
WARNING
• Check that the wheels are rmly xed and cannot be pulled off
the shaft.
Assembly and use of the chassis
To Next Page
Loading...
