5 | P a g e
Charging the Bike
Charging the battery is done from the charger port located on the battery itself. The charger is separated into two different
parts: A cable with one end that goes into a 110V power outlet, and the other end that goes into the charger box itself, the
charger box with a cable that plugs into the bike.
1. Take the cable from the charger box and plug it into the charger port located on the battery itself.
2. Plug one end of the separate cable into the changer box.
3. Plug the other end of the cable into a power outlet.
4. Confirm that the charging indicators turn red.
Note: When the battery is fully charged, the charging indicator will turn green.
5. Unplug the charger from the power outlet.
6. Unplug the charger from the battery.
Note: The charger light must be red when both plugs are plugged in. It will always turn red first if the bike has been used.
It will turn green after it is fully charged.
WARNING!
Charge the bike for no more than 8 hours (lithium ion batteries).
To Next Page
Loading...
