Seat
To open the seat, use the keyhole on the side of the bike (shown in the picture above on the left). Turn right to unlock
the seat.
Power Cable
The power cable (as indicated in the white arrow above, in the picture on the right) controls the power running through
the bike from the battery. When the power cable is unplugged from the battery, it stops the power from flowing
throughout the bike and vice versa. None of the electrical aspects will work on the bike if the power cable is unplugged.
WARNING!
FOR LEAD ACID BATTERY:
In the winter time, fully charge the bike and unplug the battery for maintenance. Fully charge the battery once
a month to ensure maximum battery life.
Don‟t leave it uncharged for extended periods of time!
FOR LITHIUM BATTERY:
During long periods of inactivity, make sure that there is more than 25% power in the battery, then remove the
battery from the bike.
To Next Page
Loading...
