EMMO Urban - Handlebar Controls - Signals and Horn; Horn and Signaling

17 | P a g e
High/Low Beam Switch
Pushing the switch up
activates the high beams for
the front headlights, pushing
it down deactivate the high
beams (make sure the light
switch is on first).
Flicking the button
downwards causes the
passing signals to flicker.
Turning Signals
Pushing the switch to
either the left or right
positions will turn on the
respective front/rear
turning signals. Pushing
the switch in will turn off
your turning signals.
Horn
Pushing this button
sounds the horn.