Charging the Bike
There are two ways to charge the Emmo Urban.
1. As indicated on page 6, you can remove the battery from
the bike and charge the battery directly. To do so, you
must unlock the seat and unplug the power cable from the
battery itself, and then you can remove the battery by
using the battery handle to pull it out. After the battery
has been removed, plug the charger into the battery first
then plug the other end into an outlet to charge the
battery.
2. To charge the Urban without having to remove the battery
from the bike, plug your charger into the socket that is
underneath the seat and between the shocks (as indicated
by the circle in the image above), then plug the other end
of the charger into an outlet.
WARNING!
*CHARGING THE E-BIKE SHOULD
TAKE A MAXIMUM OF 8 HOURS.
*DO NOT CHARGE THE E-BIKE FOR
MORE THAN 12 HOURS.
OVERCHARGING WILL OVERHEAT
THE CHARGER, AND WILL RESULT IN
THE CHARGER DAMAGING THE
BATTERY.
*MAKE SURE TO FULLY CHARGE THE
E-BIKE ONCE A MONTH DURING
LONG PERIODS OF INACTIVITY (i.e.
WINTERTIME).
To Next Page
Loading...
