EMMO Zone S.3 - Page 32

32
Primary
Circuit
Breaker
Secondary
Circuit
Breaker 1
Secondary
Circuit
Breaker 2
Explanation Note
I ON ON ON
The bike still works
with both batteries
connected. But only
one battery should
be connected to the
bike at a time*.
II ON ON OFF
Battery 1 is
connnected to the
bike.
III ON OFF ON
Battery 2 is
connnected to the
bike
IV OFF
Both batteries are
disconneted from the
bike.
*Failure to following the instructions could result in damage to the battery and the bike.
Warning:
• ONLY one of the secondary circuit breaker should be switched on at a
time. To switch between di󰀨erent battery packs, turn o󰀨 the
corresponding secondary circuit breaker of the battery that you are
using, before switching the other secondary circuit breaker on.