EasyManua.ls Logo

Emos E0422 - Specifications; Getting Started

Emos E0422
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
GB | Thermometer
The thermometer measures indoor and outdoor temperature.
Specications
Temperature ranges:
Indoor temperature (IN): 0 °C to 60 °C
Outdoor temperature (OUT): -40 °C to 60 °C
Measurement accuracy: ±1 °C
Temperature resolution: 0.1 °C
Temperature probe: outdoor, water-resistant
Wired temperature probe length: 0.9 m
Power supply: 2× 1.5 V AAA
Description of the Thermometer (See Fig. 1)
1 – Unit of outdoor temperature
2 – Minimum outdoor temperature
3 – Unit of indoor temperature
4 – Minimum indoor temperature
5 – Maximum indoor temperature
6 – Automatic deletion of memory of measured values every 24 h
7 – Indoor temperature
8 – Maximum outdoor temperature
9 – Outdoor temperature
10 – Switch for changing unit of temperature °C/°F
11 – Stand
12 – Battery compartment
13 – Wired outdoor probe
Getting Started
1. Remove the battery cover on the back of the device.
2. Insert two 1.5 V AAA batteries. Make sure to observe the correct
polarity of the batteries according to the drawing on the bottom
of the battery compartment. Use 1.5 V alkaline batteries only.
Do not use 1.2 V rechargeable batteries.
3. Close the battery compartment.
To measure outdoor temperature, pull the wired probe underneath a
window which is not frequently used. Frequent opening may damage

Related product manuals