7
TUNE mode
If the LOOP mode is activated, turn it o by pressing the LOOP button.
Then repeatedly press, or press and hold, the TUNE button.
In this way, you can also set the following colours and their shades: white > red > orange > yellow > green > turquoise >
blue > purple.
OUTDOOR TEMP mode
Weather station allows you to adjust automatic change of the display colour depending on the outside temperature.
If you press the OUTDOOR TEMP button, the colour of the display will change depending on the outside temperature.
This mode can be used for each individual sensor.
Colours depending on the outside temperature reading:
Colour number Temperature
from
Temperature to Colour
1 ≤ -20.0 °C Dark Blue
2 -19.9 °C -11.0 °C Light Blue
3 -10.9 °C -5.0 °C Dark Aqua
4 -4.9 °C -2.0 °C Light Aqua
5 -1.9 °C 1.0 °C White
6 1.1 °C 4.0 °C Peak green
7 4.1 °C 8.0 °C Green
8 8.1 °C 12.0 °C Yellow
9 12.1 °C 16.0 °C Light yellow
10 16.1 °C 20.0 °C Light orange
11 20.1 °C 24.0 °C Orange
12 24.1 °C 28.0 °C Light Red
13 28.1 °C 32.0 °C Red
14 32.1 °C 36.0 °C Pink
15 36.1 °C 40.0 °C Light pink
16 40.1 °C 45.0 °C Purple
17 > 45 °C Grey
Care and Maintenance
The product is designed to provide trouble-free service for many years if used appropriately.
Here is some advice for proper operation:
• Read the manual carefully before using this product.
• Do not expose the product to direct sunlight, extreme cold and moisture, and sudden changes in temperature. This
would reduce accuracy of detection.
• Do not place the product in locations prone to vibration and shocks – these may cause damage.
• Do not expose the product to excessive force, impacts, dust, high temperatures or humidity - these may cause mal-
function, shorter battery life, damage to batteries and deformation of plastic parts.
• Do not expose the product to rain or moisture, if it is not intended for outdoor use.
• Do not place any open ame sources on the product, e.g. a lit candle, etc.
To Next Page
Loading...
