EasyManua.ls Logo

Emos GK7 - Technické Specifikace

Emos GK7
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3
This device is not designed for use by persons (including children), whose physical, sensual or mental
ability, or lack of experience prevent safe handling of the device, unless they are under supervision or
unless they have been instructed regarding use of the device by person responsible for their safety.
Children must be supervised in order to prevent them from plying with the device.
After service life do not dispose the product as unsorted communal waste. Use collecting
spots for sorted waste. By proper disposal of the product you will prevent negative impact on
human health and the environment. Material recycling contributes to protection of natural
resources. For more information on recycling of this product consult your municipal authorities,
organizations processing house waste or the vendor of this product.
We declare under our sole responsibility that the equipment GK7 indicated below with its concept and
design, same as the version launched by us, conform to the fundamental requirements and other applicable
provisions of the Governmental Decree. In case of any changes made without our approval this declaration
shall be considered null and void.
Detektor napětí – GK7
LED dioda
Detekční hrot Ochranný výstup Bateriový kryt
Technické specikace
Rozsah napětí: (AC - střídavé) 70V - 1000V
Indikace: rozsvícení LED diody + akustický signál
Frekvenční rozsah 50/60 Hz
Mezinárodní symboly
straha, riziko nebezpečí – Nebezpečí úrazu elektrickým proudem
Použití
Před použitím vložte baterie (2x 1,5V AAA).
Používejte pouze alkalické baterie stejného typu, nepoužívejte nabíjecí baterie.
Otočte kryt baterie do polohy OFF a potom stlačte směrem dolů a otočte doprava.
Uvolněte krytku a vložte baterie, dbejte na správnou polaritu.
Nasaďte zpět krytku do polohy OFF.
Detekce napětí
Otočte horní kryt baterií do polohy ON.
Přiložte hrot ke zdroji napětí (zásuvka, kabel).
V případě, že je zdroj pod napětím, rozbliká se červená dioda a zazní zvukový signál.
Poté horní kryt otočte do polohy OFF – detektor je neaktivní.
Pokud je optický a akustický signál slabý, vyměňte baterie.
CZ

Related product manuals