Emos P5611OT - Specifications

3
3
1 2
3
GB | Wireless Thermostat with OpenTherm Communication
The P5611OT thermostat is designed for controlling heating and air-conditioning
systems. Unlike conventional home thermostats, the P5611OT thermostatic system
has a separate, wirelessly connected control unit (transmitter) and a switching unit
(receiver). The switching unit is used to connect and switch heating/air-conditioning
systems while the portable control unit is used to control and adjust temperature. The
units communicate with each other via radio signal. The advantage of the system is
its variability and easier access to temperature controls.
Important
• Before rst use, make sure to read carefully the Operating Manual for the thermo-
stat, as well as the manual for the boiler or air-conditioning equipment.
• Turn o power before installing the thermostat!
• Installation should be carried out by a qualied professional!
• Abide by prescribed standards during installation.
SPECIFICATIONS
Switched load: max. 230 V AC; 16 A for resistive load; 5 A for inductive load
Clock accuracy: ±60 seconds/month