EmbracePlus has two metal
contact points that are used by
the EDA sensor. This is type BF
part which means that it may
generate a leakage current
when in contact with the skin.
ISO 60601-1 safety test
demonstrated that this part is
safe.
Indicates the need for the
user to consult the
EmbracePlus instruction
for use for important
information, warning, and
cautions
Indicates that EmbracePlus
intentionally generates RF
signals for data transmission to
a connected device.
Indicates the
manufacturing date of
the device
Indicates that EmbracePlus is
classified as IP67 - resistant to
submersion in 1 m (about 3.3
feet) of water for up to 30
minutes
Keep in dry conditions
and away from rain
Indicates the device Lot
Number
Indicates the minimum
and maximum
temperature at which the
EmbracePlus shall be
stored
Indicates the minimum and
maximum pressure at which the
EmbracePlus shall be stored
Indicates the minimum
and maximum humidity
at which the
EmbracePlus shall be
stored
Indicates the need for the user
to consult the EmbracePlus
instruction for use for
important information,
warning, and cautions
Indicates the web
address at which the
device instruction for use
can be found
To Next Page
Loading...