EasyManua.ls Logo

EMPHASER ECP210-S6 - Set Content; Technical Features

EMPHASER ECP210-S6
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
11
SET CONTENT
Unpack the loudspeakers, crossovers and accessories and check if all parts are contained and
undamaged, as listed below:
• 2mid/woofersECP210-S6/ECP213-S6/ECP216-S6
• 2tweetersECP-S6
• 2crossoversECP210-S6/ECP213-S6/ECP216-S6
• 2mid/woofergrilles
• 4tweetermountingadaptors
• 1setofwiringhardwarefortweeterandmid/woofer
• 1setofmountinghardwarefortweeterandmid/woofer
• 1instructionmanual
TECHNICAL FEATURES
MID/WOOFER
10 cm / 13 cm / 6.5"/ 16.5 cm Euro-DIN stemped steel basket
Strontium-Ferrite magnet
Woven fiberglass cone
Butyl rubber surround
2-layer VC on kapton former
Vented cavity below spider
Gold plated terminal pins
Rubber boot
TWEETER
19 mm Titanium Dome Tweeter
CCA voice-coil on AL-former
NdFeB Neodymium magnet motor
Swivel tweeter housing
CROSSOVER
3-step tweeter attenuation
Glasfiber Epoxy circuit board
MKP high-pass capacitor
Gold plated terminal

Related product manuals