Why is my Empisal Dress Maker 120A breaking upper thread?
Your Empisal Sewing Machine's upper thread might be breaking due to several reasons. Check if the zigzag width is properly adjusted; if not, readjust it. Ensure the machine is correctly threaded. If the upper thread tension is too tight, reduce it. A bent needle can also cause this, so replace it. Lastly, inspect the bobbin case for scratches or nicks; polish or replace it if necessary.
What to do if my Empisal Dress Maker 120A is jamming?
If your Empisal Sewing Machine is jamming, it could be due to excessive tension, so readjust it. Also, the needle, thread, and fabric might not match; use the correct needle and thread according to the type of fabric. Finally, ensure all moving parts are oiled.
What to do if my Empisal Dress Maker 120A Sewing Machine is breaking bobbin thread?
If your Empisal Sewing Machine's bobbin thread is breaking, it could be due to tight bobbin thread tension; reduce it. Ensure the needle is correctly inserted; if not, re-insert it. Check that the machine is properly threaded. Also, inspect the bobbin case for lint or thread and clean it if necessary.
Why is my Empisal Dress Maker 120A Sewing Machine breaking needle?
A breaking needle in your Empisal Sewing Machine can occur due to several reasons. Ensure the needle is correctly inserted; if not, re-insert it. Check for a bent needle and replace it if necessary. Avoid pulling the fabric while sewing. Finally, make sure the needle, thread, and fabric are compatible; use the correct needle and thread for your fabric.
How to fix puckering on Empisal Dress Maker 120A?
Puckering when using your Empisal Sewing Machine can happen if the tension is too tight; reset it. Also, check if you are using the correct fabric, needle, and thread and replace them if needed.
General| Type | Mechanical Sewing Machine |
|---|---|
| Model | Dress Maker 120A |
| Stitch Options | 12 |
| Buttonhole | 4-Step |
| Needle Threader | No |
| Stitch Length | Adjustable |
| Stitch Width | Adjustable |
| Free Arm | Yes |
| Bobbin Type | Front-Loading |
| Needle System | 130/705 H |
| Power Source | Electric |
To Next Page
