Empisal EES50 - User Manual

Questions and Answers

M
Mrs. Stacy JohnsonAug 16, 2025
Why does the upper thread keep breaking on my Empisal Sewing Machine?
- M
  Michael MatthewsAug 16, 2025
  If the upper thread of your Empisal Sewing Machine breaks, several factors could be at play. First, ensure the machine is correctly threaded by rethreading it. If the thread tension is too tight, reduce it. The thread might be too thick for the needle, so select a larger needle. Also, verify the needle is correctly inserted with the flat side towards the back. Check if the thread is wound around the spool holder pin; if so, remove the reel and wind the thread onto it. Finally, a damaged needle can cause breakage, so replace it if necessary.
D
Dennis ScottAug 19, 2025
What causes the lower thread to break on my Empisal EES50 Sewing Machine?
- W
  william46Aug 19, 2025
  If the lower thread is breaking on your Empisal Sewing Machine, start by checking the bobbin case. Remove and reinsert it, then pull on the thread to ensure it pulls easily. Also, verify that the bobbin case is threaded correctly by checking both the bobbin and bobbin case.
D
Dustin BennettAug 22, 2025
How to fix skipped stitches on my Empisal Sewing Machine?
- T
  Teresa ButlerAug 22, 2025
  If your Empisal Sewing Machine is skipping stitches, the needle may not be inserted correctly; remove and reinsert it with the flat side towards the back. The needle might also be damaged, so try inserting a new one. Ensure you're using the correct size needle for the thread. Check that the foot is correctly attached. Also, make sure the machine is threaded correctly by rethreading it.
M
Melissa AndradeAug 25, 2025
Why are the stitches loose on my Empisal Sewing Machine?
- L
  Lisa LaraAug 26, 2025
  If you're experiencing loose stitches with your Empisal Sewing Machine, first check that the machine is correctly threaded. Also, ensure the bobbin case is correctly threaded as illustrated. The needle, fabric, and thread combination might be incorrect, so ensure the needle size suits the fabric and thread. Lastly, the thread tension could be wrong, so correct it.
P
Peggy FletcherAug 27, 2025
Why are seams gathering on my Empisal Sewing Machine?
- D
  Donna JamesAug 27, 2025
  If your Empisal Sewing Machine's seams are gathering or puckering, it could be due to a few reasons. The needle might be too thick for the fabric, so select a finer needle. The stitch length might be adjusted incorrectly, so readjust it. Also, the thread tension could be too tight, so loosen it.
R
ronald78Aug 30, 2025
How to prevent seam puckering on my Empisal EES50?
- J
  jessemooneyAug 30, 2025
  If you notice seam puckering while using your Empisal Sewing Machine, the needle thread tension might be too tight, so try loosening it. Also, the needle thread might not be threaded correctly, so rethread the machine. The needle could be too heavy for the fabric, so choose one that suits the thread and fabric. Lastly, if the stitch length is too long for the fabric, make the stitch more dense.
L
Lisa DavisSep 2, 2025
What causes uneven stitches on my Empisal Sewing Machine?
- M
  Michael CantrellSep 2, 2025
  If you're experiencing uneven stitches or uneven feed with your Empisal Sewing Machine, it could be due to poor quality thread, so select a better quality thread. The bobbin case might be threaded wrong, so remove it, the thread, and reinsert correctly. Also, avoid pulling on the fabric while sewing; let the machine take it up.
K
Kathryn PhillipsSep 4, 2025
Why won't my Empisal EES50 turn on?
- V
  Veronica RobersonSep 5, 2025
  If your Empisal Sewing Machine isn't operating, make sure the machine is turned on. Press the Start/Stop button. Ensure the presser foot lifter is lowered. If the foot controller is connected, do not use the Start/Stop button; disconnect the foot controller to use the Start/Stop button. Check for any thread caught in the hook race and remove it. Finally, verify that the machine is plugged into the electric outlet.
L
Lisa ThomasSep 7, 2025
Why is my Empisal EES50 Sewing Machine so noisy?
- M
  Martin McgeeSep 7, 2025
  If your Empisal Sewing Machine is making unusual noises, it could be due to several reasons. Lint or oil might have collected on the hook or needle bar, so clean the hook and feed dog as described. A damaged needle could also be the cause, so replace it. A slight humming sound from the internal motor is normal. Also, check for thread caught in the hook, and remove the upper thread and bobbin case, turning the handwheel to clear any remnants. The feed dogs might be packed with lint.
E
Eric HenrySep 10, 2025
Why are the patterns distorted on my Empisal EES50?
- T
  theresa31Sep 10, 2025
  If the patterns are distorted on your Empisal Sewing Machine, ensure you are using the correct presser foot. If the needle thread tension is too tight, loosen it. Also, the stitch length might not be suitable for the fabric, so make a stitch adjustment.