Eyelet
Stitch
Eyelet
stitches
are used for making belt holes and other similar
applications.
A-23 A-24
A
.0 6.0 7.0
A-23: Select for sewing eyelets on belts , etc
A-24: Select for sewing eyelets on belts , etc
Select pattern 23 or 24 from the Group
Patterns "A" to get the eyelet stitch. Attach
presser the foot "A".
–
A B C
Press the " " or "+" stitch width adjustment to
button select the eyelet size.
Size of eyelet.
A. Small: 5.0mm (3/16 inch).
B. Medium: 6.0mm (15/64 inch).
C. Large: 7.0mm (1/4 inch).
Lower the needle into the fabric at the
beginning of the stitching, and then lower the
presser foot lever.
Once sewing is completed, the machine
automatically sews reinforcement stitches, then
stops.
Make a hole at the center using an eyelet
punch.
* Eyelet punch is not included with the
machine.
Please
Note:
- When using the eyelet punch, place thick paper
or some other protective sheet under the fabric
before punching the hole in the fabric.
- If thin thread is used, the stitching may be
coarse. If this occurs, sew the eyelet twice
one on top of the other.
To Next Page
Loading...
