Blind
hem
Secure the
bottoms
of skirts and pants with a blind hem, this stitch will sew
without stitches
showing
on right side of
fabric.
9 A-03 A-04
F
2.5~4.0 1.0~2.0
9: Blind hem for woven fabrics
A-03: Blind hem for stretch fabrics
A-04: Blind hem for stretch fabrics
Please
Note:
5mm 5mm
It takes practice to sew blind hems. Always
make a sewing test first.
1
Fold the fabric as illustrated with the wrong
side uppermost.
Reverse
1
side
Overcasting
stitches
Reverse
side
2
Place the fabric under the foot. Turn the
handwheel forwards by hand until the
needle swings fully to the left. It should just
a
pierce the fold of the fabric. If it does not,
adjust the stitch width accordingly.
2
3
b
3
Adjust the guide (b) by turning the knob (a)
so that the guide just rests against the fold.
4
Sew slowly, guiding the fabric carefully along
the edge of the guide.
4
5
Turn over the fabric.
5
To Next Page
Loading...
