Warning beeping
sound
- When operating correctly: 1 beep
- When operating incorrectly: 3-short beeps
- When the sewing machine is in trouble and can't sew: 3-short beeps
It means that the thread is twisted or jammed and the hand wheel axle can't move. Please look
through the "Trouble shooting guide" on page 71/72 to find the solution. After the problem has
been solved, the machine will continue to sew.
Return bobbin winder spindle to
left
If you press any button on the machine when
the bobbin is full or the bobbin winder spindle
is in the right position, then the machine will
beep 3 times as a warning.
Return the bobbin winder spindle to the left
position.
Please
Note:
If the problem is still not solved, please contact your local dealer.
Attention:
During the sewing, if the thread get jammed inside the hook stopping the needle from moving and
you continue pressing the foot control, the security switch will stop the machine completely. In
order to restart the sewing machine, you will have to turn the on/off switch to the OFF position and
then ON again.
To Next Page
Loading...
