Installing
the
extension table
* The Extension table accessory is optional.
It is not included with this machine.
1
Pull the sewing table and accessory box off
by sliding it to the left.
2
Follow the arrow, and stretch the foot of the
extension table.
1
2
3
Snap (A) of the extension table into (B) of
the machine.
Extension table can help moving during
sewing.
A
B
3
Sewing on the heavy
fabric
The black button on the right side of the
presser foot will lock the presser foot in a
horizontal position if you push it in before
lowering the presser foot. This ensures even
feeding at the beginning of a seam and
helps when sewing multiple layers of fabric
such as sewing over seams when hemming
jeans.
When you reach the point of an increased
thickness, lower the needle and raise the
presser foot. Press the toe of the foot and
push in the black button, then lower the foot
and continue sewing.
The black button releases automatically
after sewing few stitches.
Cardboard or
thick fabric
You also can place another piece of fabric
with the same thickness at the back of the
seam. Or support the presser foot while
feeding by hand and sewing toward the
folded side.
To Next Page
Loading...
