Empisal EES50 - Adding Patterns or Letters

63
Memory
5
Press the desired pattern number. (e.g. 60)
M
5
6
The selected pattern displays on the LCD screen.
M
6
6
6
7
Repeat step 5, 6 for more patterns to be stored in the
memory.
M
7
7
7
Please Note:
When the memory the full with 20 units of patterns,
the machine will beep to signal it.
M
7
8
9
Press the " " button to leave the memory mode and
return to the normal screen.
7
9
Adding patterns or letters
M
Attention:
The selected pattern will be cleared from the
memory module after closing the machine if you do
not press the " " button again when you have
completed your selection.
1
While in the memory mode, press stitch width
adjustment button until the stitch number you have
selected is displayed, then add the new stitch.
1
2
Press pattern No. (e.g. 31) The selected pattern will be
inserted.
M
2