Empisal EES50 - Raising up the Lower Thread; Cutting the Thread

16
Raising up the lower thread
1
Hold the upper thread with the left hand.
Tu rn the handwheel towards you
(counterclockwise) lowering, then raising
the needle.
1
2
Gently pull on the upper thread to bring
the bobbin thread up through the needle
plate hole. The bobbin thread will come
up in a loop.
2
3
Pull both threads to the back under the
presser foot.
3
Cutting the thread
Raise the presser foot.
Remove the fabric, draw the threads to the
left side of the face cover and cut using the
thread cutter.
The threads are cut at the proper length to
start the next seam.