Empisal EES50 - Using the Twin Needle

61
Using the twin needle
T
2.0- .0
Please Note:
When using twin needles, use the " T " presser foot regardless
of what kind of sewing will be carried out.
1
1 Insert the twin needle.
Attention:
When using twin needles, use the all purpose
foot (T) regardless of what kind of sewing foot
will be carried out.
Use only twin needle assemblies with max.
1
2mm needle distance.
2
2 Follow the instructions for single-needle
threading using the horizontal spool pin.
Thread through the left needle.
Set the second spool pin (included with
the accessories) into the hole on the top
of the machine. Thread through remaining
points, making certain to omit the thread
2
guide above the needle and pass thread
through the right needle.
3
3 Thread each needle separately.
Please Note:
Make sure that the two threads used to
thread the twin needle are of the same
weight. You can use one or two colors.
3
4
4
4 Press the Twin needle button, and the
machine automatically reduces the
maximum width for twin needle sewing.
6
6 Select a pattern and start to sew. Except the
5
Direct patterns " " and A Group patterns
14-27, the other patterns can be used.
Two lines of stitching are sewn parallel to
each other.
Please Note:
When sewing with twin needle, always
proceed slowly, and make sure to maintain a
6
6
6
low speed to insure quality stitching.